Printronix P7000 Cartridge Ribbon Printer - Manual (Page 107)

ADAPTER PARAMS
107
Novell Protocol
This option determines whether the Novell protocol will be available. The
selections are as indicated below:
• Enable (default). Makes the Novell protocol available with the ethernet
installed.
• Disable . Makes the Novell protocol unavailable during printer operation.
Nest Serv Type
You can change the Nest Server using this option, but consult your
administrator for the appropriate setting.
The options are Auto (default), Bindery, and NDS.
NetBIOS Protocol
This option determines whether the NetBIOS protocol will be available. The
selections are as indicated below:
• Enable (default). Makes the NetBIOS protocol available with the ethernet
installed.
• Disable . Makes the NetBIOS protocol unavailable during printer
operation.
Novell Frame
This selection determines which framing scheme will be used in processing
Novell signals.
• Ethernet 802.2 (default)
• 802.2 Snap
• Auto Sensing
• Ethernet II
• Ethernet 802.3
ASCII Data Port
This option sets the port number for ASCII print jobs. The data port number
needs to match your host system setting.
• 9100 (default)
• 1023 - 65535
IPDS Data Port
This option allows you to set the port number for IPDS print jobs only if the
IPDS option is installed.
The range is 0 - 5000, and the default is 5001.