Printronix P7000 Cartridge Ribbon Printer - Manual (Page 159)

159
LinePrinter Plus Emulation (With PCL-II)
NOTE: When the printer is set to SPC Twx Params or SPC Coax Params, no
LP+ menu items will take effect on the same offline. The LP+
Emulation resets when the printer is taken offline.
Printer Protocol
Select the LinePrinter+ protocol you wish to use. Refer to the LinePrinter Plus
Programmer's Reference Manual for more information.
CPI/LPI Select
This parameter lets you specify the characters per inch (cpi) and lines per
inch (lpi) values.
EMULATION
(from page 123)
Printer
Protocol
CPI/LPI
Select
Font
Attributes
Page
Format
Print Char.
Set
Reset Cmd
CFG Ld
(see page 158) Select CPI
10.0 CPI*
12.0 CPI
13.3 CPI
15.0 CPI
17.1 CPI
20.0 CPI
Select LPI
6.0 LPI*
8.0 LPI
10.3 LPI
Typeface
Data Processing
NLQ
OCR-A
OCR-B
High Speed
NLQ San Serif
Prop. Spacing
Disable*
Enable
Bold Print
Disable*
Enable
Italic Print
Disable*
Forward Slant
Backward Slant
Slashed Zero
Disable*
Enable
Disable*
Power up config
Current config
Factory config
* = Factory Default
LinePrinter+
LinePrinter Plus Emulation (With PCL-II)