Printronix P7000 Cartridge Ribbon Printer - Manual (Page 30)

30
Chapter 3 Operational Procedures
Figure 7. Loading New Paper into the Printer
6. Pull the new paper above and behind the ribbon mask, but in front of the
existing paper. See Figure 4 on page 21 for the ribbon mask location.
If necessary, gently press the existing paper back.
7. Align the top edge of the new paper with the top perforation of the existing
paper.
8. Load the new paper over the existing paper. Open and load the tractors
one at a time to prevent the paper from slipping.
NOTE: Make sure that the top edge of the new paper lines up with the top
horizontal perforation of the last page.
183888a
New Paper
Existing Paper