Printronix P7000 Cartridge Ribbon Printer User Manual
Page 37
Reload Paper
37
Figure 15. Adjusting the Platen Lever
28. Turn the platen stop knob clockwise or counterclockwise to match the
paper thickness. (The A-B-C scale corresponds approximately to 1-, 3-,
and 6-part paper thickness. Adjust until you have the desired print
quality).
NOTE:
The platen stop allows you to set an optimum and consistent
thickness that is not affected when opening and closing the platen
lever.
29. Lower the platen lever until it stops.
30. Press
ON LINE/CLEAR
to clear any fault messages (such as “LOAD
PAPER”) from the LCD.
31. Press
SET TOF
. The top-of-form you have set moves down to the print
position.
If there is data in the buffer, the paper moves forward to the last
print position on the next page.
32. Press
ON LINE/CLEAR
and close the printer cover.
183444 REV B
183444b
183446b
Platen Lever
Vertical Position
Knob
Platen Stop
Knob
A
Platen
Stop
183445b
Paper Thickness
Indicator
A