Printronix P7000 Cartridge Ribbon Printer - Manual (Page 74)

74
Chapter 4 Main Menu
OpenPrint P7000 STD Postscript/PDF Firmware
OFFLINE
CONFIG.
CONTROL
page 85
HOST
INTERFACE
page 87
Load Config.
Save Config.
Print Config.
Delete Config.
Power-Up Config.
Protect Configs.
Name Configs
Reset Cfg Names
Auto Save
Auto Switching*
Centronics
Dataproducts
IEEE 1284
Serial
E-Net Adapter 1
Ethernet 1
NETWORK
SETUP 1
page 105
Adapter Address 1
Adapter Params 1
Ethernet Address
1
Ethernet Params 1
WLAN Address 1
WLAN Params 1
WLAN Kerberos 9
WLAN LEAP
9
WLAN EAP 9
QUICK
SETUP
page 77
HOST INTERFACE
Adapter Address 1
Ethernet Address
1
WLAN Address 1
ZTP DataTime 8
ZTP WaitTime 8
ZTP TearDist 8
ACTIVE EMULATION
Resolution 5
Paper Size 5
PGL SFCC 2
VGL SFCC 3
Printer Protocol 4
Form Length 4
Form Width
4
Select CPI 4
Select LPI 4
P-Series SFCC 4
Ribbon End Point
Save Config
Power Up Config
ZTP
SETTINGS 8
page 333
ZTP Function
ZTP TearDistance
ZTP Data Time
ZTP Wait Time
ZTP Platen Open
1 If installed
2 If PGL is selected from the ACTIVE EMULATION menu.
3 If VGL is selected from the ACTIVE EMULATION menu.
4 If LP+ is selected from the ACTIVE EMULATION menu.
5 If Postscript/PDF is selected from the ACTIVE EMULATION menu.
6
Not available if PNE Port is set at Serial.
7 If Real Time Clock (RTC) option is installed.
8 Available for Zero Tear Pedestal printer only.
9 Based on WLAN radio installed.
10 If a Feature File has been downloaded.