Printronix P7000 Cartridge Ribbon Printer - Manual (Page 72)

72
Chapter 4 Main Menu
P7000 ANSI Firmware
OFFLINE
CONFIG.
CONTROL
page 85
HOST
INTERFACE
page 87
Load Config.
Save Config.
Print Config.
Delete Config.
Power-Up Config.
Protect Configs.
Name Configs
Reset Cfg Names
Auto Save
Auto Switching*
Centronics
Dataproducts
IEEE 1284
Serial
E-Net Adapter 1
Ethernet 1
NETWORK
SETUP 1
page 105
Adapter Address 1
Adapter Params 1
Ethernet Address
1
Ethernet Params 1
WLAN Address 1
WLAN Params 1
WLAN Kerberos 9
WLAN LEAP
9
WLAN EAP 9
QUICK
SETUP
page 77
HOST INTERFACE
Adapter Address 1
Ethernet Address
1
WLAN Address 1
ZTP DataTime 8
ZTP WaitTime 8
ZTP TearDist 8
ACTIVE EMULATION
PGL SFCC 2
VGL SFCC 3
Printer Protocol 4
Form Length
Form Width
Select CPI
Select LPI
P-Series SFCC 4
Margins 5
Ribbon End Point
Save Config
Power Up Config
ZTP
SETTINGS 8
page 333
ZTP Function
ZTP TearDistance
ZTP Data Time
ZTP Wait Time
ZTP Platen Open
1 If installed
2
If PGL is selected from the ACTIVE EMULATION menu.
3 If VGL is selected from the ACTIVE EMULATION menu.
4 If LP+ is selected from the ACTIVE EMULATION menu.
5 If ANSI is selected from the ACTIVE EMULATION menu.
6 Not available if PNE Port is set at Serial.
7
If Real Time Clock (RTC) option is installed.
8 Available for Zero Tear Pedestal printer only.
9
Based on WLAN radio installed.
10 If a Feature File has been downloaded.