Slash 0, Select lpi, Auto uppercase – Printronix P7000 Cartridge Ribbon Printer User Manual
Page 201: Skip cmd prefix, Forms handling
201
Slash 0
This parameter allows you to print the numeral “0” with or without the slash.
This option applies to all character sets except OCR A and OCR B.
•
Disable
(default). Zero is printed without a slash.
•
Enable
. Zero is printed with a slash.
Select LPI
This is the number of lines to be printed per inch. For
example, at 6 lpi there is
1/6 inch from the top of one print line to the top of the next print line. The
options are:
•
6.0
(default)
•
8.0
•
9.0
•
10.0
Auto Uppercase
This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
•
Disable
(default).
The printer will print text in upper and lowercase.
•
Enable
. The printer will print text in uppercase only.
Skip Cmd Prefix
This parameter determines if the printer will print any data before a PGL
command is received.
•
Enable
(default).
The printer ignores all data on the current line before an
IGP command.
•
Disable
. The printer will print all data on the current line before an IGP
command.
Forms Handling
This submenu allows the user to handle the form in the following ways:
•
Disable
(default). No effect.
•
Auto Eject
. Automatically ejects a page at the end of the job to spill out
the last page.
•
Auto TOF
. Automatically does a form feed (FF) at the end of each form to
the next top of form.