Printronix P7000 Cartridge Ribbon Printer - Manual (Page 97)

Serial Submenu
97
Trickle Time
When the printer is printing data from a host and a second job is received by
the printer from a different host, Trickle Time prevents the second host from
timing out while it is waiting for its data to be printed. In order to support this
feature, the port has to be able to accept data from the host and store it for
future use.
For example, if the printer is printing a job from the serial port, and then
receives a second print job from the parallel port, the data from the parallel
port will “trickle” bit by bit into the printer buffer to prevent a timeout error from
being sent back to the host connected to the parallel port.
The selected value is the time that the printer waits before getting the next
byte of data from the host. The Trickle Time value should be less than the
host time out value, but not too much shorter or else the printer fills up its
buffer too fast. This function is not applicable for C/T hotport.
Serial Submenu
Serial
(from page 87)
Interface
Type
Data
Protocol
Baud
Rate
Word
Length 8
Stop
Bits 1
Parity
Data Term
Ready
Request to
Send
Buffer Size
in K 1
Poll
Character
Poll
Response
RS 232*
RS 422
XON/XOFF*
ETX/ACK
ACK/NAK
Series1 1 Char
Series1 2 Char
ENQ/ACK
DTR
600 Baud
1200 Baud
2400 Baud
4800 Baud
9600 Baud*
19200 Baud
38400 Baud
57600 Baud
115200 Baud
8*
7
1*
2
None*
Odd
Even
Mark
Sense
True*
On-Line and BNF
Off-Line or BF
On-Line
False
On-Line and BNF*
Off-Line or BF
On-Line
False
True
16*
1-16
00 Hex*
(0-FF hex)
0 ms*
(1-30 ms)
* = Factory Default
1 OpenPrint HD products have an extended range to 256.
One Char
Enquiry
Disable*
Enable
Framing
Errors
Disable
Enable*
Idle
Response
Disable*
Enable
Offline
Process
Disable
Enable*