SENA ProBee-ZE10 User Manual
Page 58
58
ProBee-ZE10 User Guide Rev.1.5
AT+NODETYPE=2
# set node type as Router
OK
# Response
AT+PANID=7772
# Set same 16-bit PAN ID (7772) as Coordinator
OK
# Response
AT+GPIO=5550044055550
# Set ADC_2 and ADC_3 as Analog Input
# OR
#AT+GPIO5=4 (Set ADC_2 as Analog Input)
#AT+GPIO6=4 (Set ADC_3 as Analog Input)
OK
# Response
6.6.3
Applying
6.6.3.1
Applying and Confirm of Coordinator
The AT commands for Applying and Confirm of Coordinator:
ATZ
# Apply Coordinator Configuration And
# Construct Network
OK
# Response
AT+LONGADDR?
# Confirm Long Address of Coordinator
0001950000001481
# Long Address of Coordinator
OK
# Response
AT+OPCH?
# Confirm Network Channel
20
# Network Channel
OK
# Response
AT+OPPANID?
# Confirm Network PAN ID
7772
# Network PAN ID
OK
# Response
AT+SHORTADDR?
# Confirm Network Short Addreess of Coordinator
0000
# Network Short Address
OK
# Response
6.6.3.2
Applying and Confirm of Router
The AT commands for Applying and Confirm of Coordinator:
ATZ
# Apply Router Configuration And Construct Network
OK
# Response
AT+LONGADDR?
# Confirm Long Address of Router
0001950000000212
# Long Address of Router
OK
# Response