SENA ProBee-ZE10 - Manual (Page 71)

71 ProBee-ZE10 User Guide Rev.1.5
7.5.6 AT+PERMIT or AT+PJ
Description
Permit other nodes to join the network. (0~254s, 255=continuance) An end-device
cannot perform it.
Execute AT+PERMIT<CR> AT+PERMIT=<value><CR>
Response OK<CR>
Range 0 - 255
7.5.7 AT+LEAVE or AT+LV
Description Leave the current network.
Execute AT+LEAVE<CR>
Response OK<CR>
7.6 End-device
7.6.1 AT+SLEEP or AT+SM
Description Enter the sleep mode immediately if the node is a sleepy end-device.
Execute AT+SLEEP<CR>
Response OK<CR>
7.6.2 AT+PARENTLA or AT+PL
Description Get the 64-bit IEEE address of the parent node.
Execute AT+PARENTLA?<CR>
Response
<IEEE address><CR>
OK<CR>
7.6.3 AT+PARENTSA or AT+PS
Description Get the 16-bit Node ID of the parent node.
Execute AT+PARENTSA?<CR>
Response
<node ID><CR>
OK<CR>
7.6.4 AT+CHILDTABLE or AT+CT
Description Get the child table composed of the end-devices.
Execute AT+CHILDTABLE?<CR>
Response
<node type>|<IEEE address>|<node ID>
List of the child nodes…
OK<CR>