SENA Parani-MSP100 - Manual (Page 17)

17
Configurable ranges:
Baud rate 1200 ~ 115200 bps
Character size 8, 7, 6, 5 bits
Parity Check None / Even / Odd
Stop Bit 1 bit or 2 bits
Flow Control
Hardware (RTS/CTS),
Software (XOn/Off),
None
For applying changed configuration, please RESUPPLY the power, and then Parani-MSP100 will start
to operate as RS232 mode.
Advice: If you need to do data communication via RS232 port, you do not need
to configure Network settings.
3.5 Reset/Reboot/Quit
Entering no. 5, Parani-MSP100 RESET, in the main menu, restores all factory Default value settings.
REBOOT restarts Parani-MSP100 for new configuration application.
QUIT instantly aborts current processing.