SENA Parani-MSP100 - Manual (Page 50)

50
A.9. Other Commands
DUMP [idx] [bin]
: This command shows data that flows between Host and Bluetooth
devices.
[idx]: To select a specific device to monitor. (255 means all of devices)
[bin]: To display data in binary format.
format: <dir:1><idx:1><length:2><timestamp:4><data… :length>
timestamp: in milliseconds
Ex.: DUMP
> line 0 len 4 timestamp 1413986
61 62 63 64 abcd
< line 0 len 4 timestamp 1414056
4F 4B 0D 0A OK..
+OK
LOG [line]
: LOG displays system logs. If line number specified, only latest <line> rows
will be displayed.
Ex.: LOG
<30>Jan 1 00:00:09 msp: Parani-MSP100 ver 2.3 started
<30>Jan 1 00:00:09 msp: Loading configurations…
…
+OK
HELP
: HELP command displays all control commands available.
Ex.: HELP
+OK
VER
: To see software version no. of Parani-MSP100
Ex.: VER
+OK Ver 2.3
CTRL <port no.>
: Control port default value is ‘2525’. CTRL command assigns new control
port number. Revised control port number is effective after Parani-
MSP100 ™ restart. Default CTRL displays current control port number