Configuration via web – SENA Parani-MSP100 User Manual
Page 32
Advertising
32
Pressing ‘Log’button, system log messages will appear in notepad. System log is the source
of invaluable information when the problems occur during operation.
4.2. Configuration via WEB
Parani-MSP100 configuration access is available via Telnet or a local Web browser.
SENA provides Web user interface to expedite Parani-MSP100 configure/manage and current status
check functions.
To access Parani-MSP100 via Web interface, open a web browser and enter the
Parani-MSP100 IP address in the address area.
Here is shown the 192.168.222.7 address assigned to Parani-MSP100 in the preceding configuration
example.
Enter the default ID: admin, Password: admin.
Advertising