SENA Parani-MSP100 - Manual (Page 60)

60
frame called ‘In-Band Command’. Inserted frame will be processed by Parani-MSP100 and not be
transferred to destination device.
**INI+DST,<dst1>,<dst2>,… **
where, dstX means Bluetooth address of destination.
ex)
**INI+DST,00:0B:53:10:00:8A**Hello**INI+DST,00:0B:53:10:00:8B,00:0B:53:10:00:8C**Bluetooth
For example, if you send preceding frame to Parani-SD, 00:0B:53:10:00:8A device will receive ‘Hello’
and the other devices will get ‘Bluetooth’as below figure.
All Parani-SD should be connected to Parani-MSP100.
As Serial Hub mode does not need TCP/IP network connectiv ity, users do not need to configure
network settings. Only power-supply needed.
C.6 RS232 mode
Multi-drop
If users set Parani-MSP100 to RS232 mode, Parani-MSP100 may act as 1:N multi-serial port by its
RS232 port. In RS232 mode, Parani-MSP100 will send data to external serial port, not via Ethernet
network.
00:0B:53:10:00:8A
00:0B:53:10:00:8B
00:0B:53:10:00:8C
“Bluetooth”
“Bluetooth”
“Hello”