SENA Parani-MSP100 - Manual (Page 20)

20
4.1.3. Operation Mode
Parani-MSP100 may be set to different type of modes, so users may have to select one for its own
application. There are 6 types of modes: Server, Client, Vertex, Repeater, Serial Hub, and RS232.
•
Operation Mode
This shows current type of Mode.
•
Mode Change
Users may change and select the type of Operation.
•
Search
Users may search Parani-MSP100 on the network.
A) Server Mode
In Sever Mode, Parani-MSP100 will operate as a Server on the network. Host PC will connect
to Parani-MSP100 via TCP/IP Ethernet and Parani-MSP100 will recieve the connection. After
connection, full duplexing is possible.
Users need to select the Port number to standby to receive connection from Host PC.
Note: While Bluetooth devices are connected to Parani-MSP100, mode change
is not possible.