SENA Parani-MSP100 - Manual (Page 35)

35
(4) [] Re-connect automatically if link is lost.
For Host connect retry, if failed. Retry frequency is set in the preceding function.
•
Vertex Mode
Parani-MSP100 Vertex Mode avails Wireless RS485 multidrop service when assigned at this
site.
(1) Vertex port: For Parani-MSP100 Vertex port no. entry.
(2) Allow [] TCP connections to vertex port:
For entering the number of Hosts connectable to Parani-MSP100.
4.2.3. Network Setting
For user Parani-MSP100 network setting.
(1) [] use DHCP: When checked, Parani-MSP100 receives IP address from DHCP server.
(2) IP address/Network mask/Gateway/DNS: Enter appropriate data to assign static IP address for
Parani-MSP100.
(3) MAC: Displays MAC Parani-MSP100 address; non-user entry
(4) [] use ADSL: Select this option when ADSL networking
(5) User/Pass: Enter ID/password data for ADSL login.
4.2.4. Restore Factory Setting
To reset to Parani-MSP100 default factory settings, click the ’Restore’button.