SENA Parani-MSP100 - Manual (Page 45)

45
Ex.: STATION 00:0B:53:00:00:01
+OK
REPEATER
: Display all of repeaters and Bluetooth devices connected currently.
Entry starting with R is repeater and one with P is Bluetooth device.
Response: R|station|repeater|repeater_name
P|msp|peer|peer_name
Ex.: REPEATER
R|00:0B:53:00:00:01|00:0B:53:00:00:02|Parani-MSP100_001002
P|00:0B:53:00:00:02|00:0B:53:00:00:10|PSDv3b-000010
+OK
A.7. Commands for Bluetooth Configuration
BTNAME <name>
: BTNAME command audits or revises Parani-MSP100 ™ Device Names
exposed to other Bluetooth devices.
If configured with default name (i.e., Parani-MSP100), lower part of
Bluetooth address will be appended to the name.
Ex.:
BTNAME My Parani-MSP100
+OK
BTNAME
+OK My Parani-MSP100
PIN <pin-code>
: PIN command revises the Bluetooth PIN code. Max.: 16 bytes, ASCII
code only.
Ex.: PIN 1234
+OK
SECU <low|high>
: SECU command revises the security level. Low obtains no security; High
obtains Enabling Security. Default SECU displays current security level.
Ex.: SECU high
+OK
SECU
+OK high
PAIR <on|off>
: For Pairable mode enable/disable. In High security levels, when Paring