SENA Parani-MSP100 - Manual (Page 46)

46
mode is set to off, only Bluetooth devices already sharing Link Key (see
LKEY command) can connect with Parani-MSP100 ™ (non-pairable mode)
Ex.: PAIR off
+OK
PAIR
+OK off
LKEY
: For auditing currently paired Bluetooth devices sharing Parani-MSP100 ™ .
Link Key.
Response: local bdaddr|remote bdaddr
Ex.: LKEY
00:0B:53:20:00:63|00:08:1B:00:52:72
+OK
TEMPKEY <on|off>
: Some Bluetooth device doesn’t save their link key and makes new link key
on every connection. This behavior causes Parani-MSP100’s flash
memory to wear out in the long period. With TEMPKEY on, Parani-
MSP100 won’t save link key neither and protects itself.
If you see tons of ‘Replacing hci0 link key xx:xx:xx:xx:xx:xx … ’messages
on System Log, you should turn this option on.
Ex.: TEMPKEY on
+OK
TEMPKEY
+OK on
SCAN [inquiry] [page] [noscan]
: For Parani-MSP100 ™ scan mode assignment. INQUIRY set to ON
activates discoverable mode. PAGE set to ON activates connectable
mode. Default SCAN displays current scan mode.
Ex.: SCAN page
+OK
SCAN
+OK page
STAT