SENA Parani-MSP100 - Manual (Page 58)

58
Fig. C.2 Client Mode
C.3 Vertex Mode
Vertex Mode is similar to Server Mode. Only difference is that, in Vertex Mode, data from a Host are
sent to all of connected Bluetooth devices, like Multi-drop. This mode can be a replacement of
RS485/RS422 multi-drop.
Fig. C.3Vertex Mode
Default data port number in Vertex mode is 3000. If you need t o use other port number, please change
the configuration using Parani-MSP100 software->Advanced configuration.
C.4 Repeater Mode
Parani-MSP100 in Repeater Mode can be used to function as a Repeater to extend the range of
Bluetooth network or avoid obstacles between Parani-MSP100 and Bluetooth devices. Please refer to
the drawing below.
Bluetooth Terminals
Bluetooth Terminals