SENA ProBee-ZE20S-SEME - Manual (Page 68)

ProBee-ZE20S-SExx User Guide Rev 1.8 68
event ID|clss|gr|dura|cr|cool(sp)|heat(sp)|av|du|ct|start time
00000001|00BB|05|0200|55|40(1000)|50(2000)|01|02|03|08-04-2013/13:14:15
0000ABAB|0035|02|0200|05|15(0500)|25(0600)|10|03|04|08-04-2013/13:14:15
OK # Event ID 00000001 is modified
AT+DLDEL=00000001<CR> # Remove DRLC Event
OK # Response
AT+DLLIST<CR> # Show DRLC Event List
event ID|clss|gr|dura|cr|cool(sp)|heat(sp)|av|du|ct|start time
0000ABAB|0035|02|0200|05|15(0500)|25(0600)|10|03|04|08-04-2013/13:14:15
OK
Client-side DRLC Cluster(Included in ProBeeSEID) can get DRLC event from server-side DRLC
Cluster(Included in ProBeeSESI) by sending ‘Get Scheduled Events’ command.
#Screen of ProBeeSEID(end-device)
AT+DEST=0000,01<CR> # Set destination address to ProBeeSESI
DESTINATION ADDRESS: 0x0000, END POINT: 0x01
OK
AT+DLGETSCH<CR> # Send ‘Get Scheduled Events’ command
OK
+0000|SE_GLOBAL_COMMAND|0701|0B
+0000|SE_LOAD_CONTROL_EVENTS|0000ABAB
# Receive response message from ProBeeSESI
AT+DLLIST<CR> # Show DRLC Event List
event ID|clss|gr|dura|cr|cool(sp)|heat(sp)|av|du|ct|start time
0000ABAB|0035|02|0200|05|15(0500)|25(0600)|10|03|04|08-04-2013/13:14:15
OK
Also server-side DRLC Cluster(Included in ProBeeSESI) can send or cancel DRLC Event to client-side
DRLC Cluster(Included in ProBeeSEID).
#Screen of ProBeeSESI(coordinator)
AT+DEST=CEDF,01<CR> # Set destination address to ProBeeSEID
DESTINATION ADDRESS: 0xCEDF, END POINT: 0x01
OK
AT+DLLOADCTRL=0000ABAB<CR>
OK # Load DRLC Event (ID 0000ABAB) to ProBeeSEID
# Now Event ID 0000ABAB is loaded on ProBeeSEID