SENA ProBee-ZE20S-SEME - Manual (Page 92)

ProBee-ZE20S-SExx User Guide Rev 1.8 92
7.12.9 AT+CCMD or AT+CC
Description Send client-side command message to destination node. (client-side command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+CCMD=<clusterID>,<commandID><CR>
Response OK<CR> or ERROR<CR>
7.12.10 AT+FACTORYRESET or AT+FR
Description
Send ‘Factory Reset’ command(Basic cluster) to destination node. (client-side
command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+FACTORYRESET?<CR>
Response OK<CR> or ERROR<CR>
7.12.11 AT+IDENTIFY or AT+II
Description
Send ‘Identify’ command(Identify cluster) to destination node. (client-side
command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+IDENTIFY=<time><CR>
Response OK<CR> or ERROR<CR>
7.12.12 AT+IDENQUERY or AT+IQ
Description
Send ‘Identify Query’ command(Identify cluster) to destination node. (client-side
command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+IDENQUERY?<CR>
Response OK<CR> or ERROR<CR>
7.12.13 AT+TIME or AT+TM
Description Get/Set Global Time. The format of time is determined by ATU value.
Execute AT+TIME?<CR> AT+TIME=<UTC time>
Response
<UTC time><CR>
OK<CR>
OK<CR> or ERROR<CR>
Default 01-01-2000/00:00:00
Range 01-01-2000/00:00:00 - 02-07-2136/06:28:15
7.12.14 AT+TSYNC or AT+TS
Description Read current time data from server-side Time Cluster (server-side Time Cluster)
Execute AT+DEST=<address>,<endpoint><CR>