SENA ProBee-ZE20S-SEME - Manual (Page 98)

ProBee-ZE20S-SExx User Guide Rev 1.8 98
Execute
AT+DEST=<address>,<endpoint><CR>
AT+SMFPMODE=<duration>,<period><CR>
Response OK<CR> or ERROR<CR>
7.14.4 AT+SMENDTIME or AT+SET
Description
Get/Set Metering End Time. This value will be used in AT+SMGETPROFD and
AT+SMGETPROFR. The format of time is determined by ATU value.
Execute AT+SMENDTIME?<CR> AT+SMENDTIME=<UTC time>
Response
<UTC time><CR>
OK<CR>
OK<CR> or ERROR<CR>
Default 01-01-2000/00:00:00
Range 01-01-2000/00:00:00 - 02-07-2136/06:28:15
7.14.5 AT+PRGETCUR or AT+PGC
Description
Send ‘Get Current Price’ command(Price cluster) to destination node. (client-side
command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+PRGETCUR=<command options><CR>
Response OK<CR> or ERROR<CR>
Range 0 - 1
7.14.6 AT+PRGETSCH or AT+PGS
Description
Send ‘Get Scheduled Prices’ command(Price cluster) to destination node. (client-
side command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+PRGETSCH=<number of events><CR>
Response OK<CR> or ERROR<CR>
7.14.7 AT+PRGETBLKPR or AT+PGB
Description
Send ‘Get Block Period(s)’ command(Price cluster) to destination node. (client-
side command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+PRGETBLKPR=<number of events><CR>
Response OK<CR> or ERROR<CR>
7.14.8 AT+PRSTARTTIME or AT+PST
Description
Get/Set Price Start Time. This value will be used in AT+PRGETSCH and
AT+PRGETBLKPR. The format of time is determined by ATU value.
Execute AT+PRSTARTTIME?<CR> AT+PRSTARTTIME=<UTC time>