SENA ProBee-ZE20S-SEME - Manual (Page 97)

ProBee-ZE20S-SExx User Guide Rev 1.8 97
Response OK<CR> or ERROR<CR>
7.13.14 AT+DLDEL or AT+DLD
Description Delete DRLC Event.
Execute AT+DLDEL=<event ID><CR>
Response OK<CR> or ERROR<CR>
7.13.15 AT+DLLOADCTRL or AT+DLC
Description
Send ‘Load Control Event’ command(DRLC cluster) to destination node. (server-
side command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+DLLOADCTRL=<event ID><CR>
Response OK<CR> or ERROR<CR>
7.13.16 AT+DLCANCELLOAD or AT+DCL
Description
Send ‘Cancel Load Control Event’ command(DRLC cluster) to destination node.
(server-side command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+DLCANCELLOAD=<event ID><CR>
Response OK<CR> or ERROR<CR>
7.14 ProBeeSEID (In-Premises Display) Profile Commands
7.14.1 AT+SMGETPROFD or AT+SGD
Description
Send ‘Get Profile’ command(Metering cluster) with ‘Consumption Delivered’ to
destination node. (client-side command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+SMGETPROFD=<number of periods><CR>
Response OK<CR> or ERROR<CR>
7.14.2 AT+SMGETPROFR or AT+SGR
Description
Send ‘Get Profile’ command(Metering cluster) with ‘Consumption Received’ to
destination node. (client-side command)
Execute
AT+DEST=<address>,<endpoint><CR>
AT+SMGETPROFR=<number of periods><CR>
Response OK<CR> or ERROR<CR>
7.14.3 AT+SMFPMODE or AT+SRF
Description
Send ‘Request Fast Poll Mode’ command(Metering cluster) to destination node.
(client-side command)