GE Industrial Solutions AF-60 LP Micro Drive - Manual (Page 11)

3.4. Main Menu
The Main Menu gives access to all parameters.
1. To enter the Main Menu, press [MENU] key until indicator in display
is placed above Main Menu.
2. Use [ Ⴃ] [Ⴍ] to browse through the parameter groups.
3. Press [OK] to select a parameter group.
4. Use [ Ⴃ] [Ⴍ] to browse through the parameters in the specific group.
5. Press [OK] to select the parameter.
6. Use [ Ⴃ] [Ⴍ] to set/change the parameter value.
7. Press [OK] to accept the value.
8. To exit, press either [Back] twice to enter Quick Menu, or press
[Menu] once to enter Status.
Illustration 3.10: Indicating Main Menu mode
AF-60 LP™ Micro Drive Programming Guide
10
3