GE Industrial Solutions 6KCV300WPD User Manual
Page 185
Input ports
Pos
float
float
float
float
Reset
Preset
int
int
Output ports
executed
description
always
Set
point to
be followed [x]
.f actual ramp time
used as reference to determine each ramp
time
It must be positive. If not it is assumed as
positive
if previous
Positive acceleration time
for
to go
and
from 0 to RefSetPoint when
is greater
than 0. It must be positive. If not it is assumed as
positive
if previous
Positive deceleration lime
for
to go
output>=0 and
from RefSetPoint to 0 when
is greater
than 0. It must be positive. If not it is assumed as
positive
if previous
Negative acceleration time
for
to
and
go
0 to
when
is less
than 0. It must be positive. If not it is assumed as
positive
if previous
Negative deceleration time
for
to
and
go from
to 0 when
is less
than 0. It must be positive. If not it is assumed as
positive
always
If Reset!=O,
is set to 0
if
If
is set to
name
type description
float
Ramp output
Set to 1 if decreasing ramp is used, otherwise it is
set to 0
int
Set to 1 if increasing ramp is used, otherwise it is
set
to 0
175