GE Industrial Solutions 6KCV300WPD - Manual (Page 52)

GEI-100340
Figure 9.1.2.1: Set Debug Window Dialog
Using radio buttons it can be selected if the probe shall be displayed in a monitor or trace window. The two
lists at the bottom of the dialog are used to select the windows in which the probe will be displayed. Select the
appropriate windows from the right list and move them by the left arrow button to the left list. A probe can be
displayed in several windows.
OK ends the probe setting while Cancel leaves everything unchanged.
9 . 2 R e m o v i n g P r o b e s
Removing probes can be done either using the Remove Probe item of the Edit menu or using the context
sensitive menu while the mouse pointer is on a probe. The actions to be performed are similar to the ones for
setting a probe.
If all probes shah be removed select the Remove All Probes item from the Edit menu.
9 . 3 C o n f i g u r a t i o n o f M o n i t o r W i n d o w
The configuration of a monitor window is done by a context sensitive menu that is opened by the right mouse
button while the monitor window has the focus. The following items are available:
Turn Off Monitor will disable the monitor, On Monitor will enable it.
Hide Legend will hide the description of the displayed probes, while Show Legend will display them on
the top of the window.
Show Grid will display a grid, Hide Grid will make it invisible.
Monitor
will open a dialog for configuration.
List of Probes will change the list of displayed probes.
Figure 9.3.1: Oscillogram Configuration Dialog
42