GE Industrial Solutions 6KCV300WPD - Manual (Page 212)

GEL100340
. .
The working environment of Win+Drive (also referred to occasionally as Win+DGFC and Win-DGFC) is com-
posed of four elements:
l
WIN-DGFC is the base software of the graphic editor and contains the New Project tool
to create a project.
l
WIN-PRJ is the software that allows an user to create an application.
l
Visual C++ is the C Microsoft compiler used to compile the diagrams created with
l
is the compiler used to compile the diagrams created with WIN-PRJ for DGFC.
This appendix describes how to install and connect the various elements.
C . 2 Minimum system required
The minimum system required for Win+Drive is as follows:
l
An IBM personal computer or compatible, based on Intel 80386 microprocessor or a later one.
l
Windows 3.1, Windows 3.11 or Windows 95 operating system.
l
At least 8 Mbyte RAM. A 16 Mbyte memory is advised.
l
At least 30 Mbyte hard disk free space.
C . 3 I n s t a l l a t i o n s e q u e n c e
The installation sequence of the following four elements is not critical, but observing the following sequence
will simplify the installation:
1.
2. visual c++
3. WIN-DGFC
4. WIN-PRJ
C.4 Recommended Installation Directories’
The current version of Win+Drive expects that software and related tools are installed in the following directo-
ries:
object
project
Visual
default directory function
containing base software
area containing the software to develop user application
compiler for the simulation
The working directory is the directory of the project. This can be installed where you prefer.
If Win+Drive or a compiler is installed in directories different from those specified in the above table, it is
necessary to take some steps to re-establish the connections to the project directory. These steps are detailed in
later sections of this appendix.