GE Industrial Solutions 6KCV300WPD - Manual (Page 64)

Input port
Represents the element from which the block receives information in the scheme
A block may have
one Input port, multiple Input ports or no Input ports.
An Input port can be connected to the following elements:
l
l
l
The Output port of another block through a connecting line
l
The Input port of a Compound through a connecting line
In any of the above mentioned cases, the connection can be performed only if the type of the elements comply
with each other.
Parameter
This element is used for the block configuration. The configuration of a block can be defined only from the
graphic editor and cannot be changed while the program is being loaded on the target.
A block may have
one Parameter, multiple Parameters or no Parameters.
output port
Represents the element from which the block issues the result of its operations.
A block may have only one Output port, multiple Output ports or no Output ports.
Au Output port can be connected to the following elements:
l
l
The Input port of another block through a connecting line.
l
The Output port of a Compound through a connecting line.
In any of the above mentioned cases, the connection can be performed only if the type of the elements
comply with each other.
54