Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 67)

LT-4201TM/4301TM Hardware Manual
67
3 Create the correct sized holes required to install the unit, using the Panel Cut-
Out Dimension and Installation.
4 Insert the display module (with the tee, if required) into the panel hole:
Use a torque between 1.2 and 2 N•m (10.62 lb-in and 17.70 lb-in) to screw the
nut with the tightening wrench.
5 Insert and push the rear module until it locks into place:
Step Action