Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 70)

LT Installation
70
Mounting Clearances
NOTE: Keep adequate spacing for proper ventilation to maintain an ambient temperature between
0...50
° C (32...122 ° F) for horizontal installation and 0...40 ° C (32...104 ° F) for vertical
installation.
Mounting and Keeping LT Ventilated
The rear module has been designed as an IP20 product and must be installed in an enclosure.
The clearances must be respected when installing the product:
 Distance and separation between the rear module and the front installation panel.
 Distance and separation between the rear module and wiring ducts.
 Distance and separation between the rear module and peripherals.
WARNING
UNINTENDED EQUIPMENT OPERATION
 Place devices dissipating the most heat at the top of the cabinet and ensure adequate
ventilation.
 Avoid placing this equipment next to or above devices that might cause overheating.
 Install the equipment in a location providing the minimum clearances from all adjacent
structures and equipment as directed in this document.
 Install all equipment in accordance with the specifications in the related documentation.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.