Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 7)

7
LT-4201TM/4301TM Hardware Manual
About the Book
At a Glance
Thank you for purchasing Pro-face's LT4000 Series Graphic Logic Controller Interface (Hereafter
referred to as the "LT").
Document Scope
The purpose of this document is to:
 Show you how to install and operate your LT.
 Show you how to connect the LT to a programming device equipped with GP-Pro EX.
 Help you understand how to interface the LT and other devices.
 Help you become familiar with the LT features.
Global Code
A global code is assigned to every Pro-face product as a universal model number.
For more information on product models and their matching global codes, please refer to the
following URL:
http://www.pro-face.com/product/globalcode.html
Validity Note
This documentation is valid for GP-Pro EX V4.0 or later.
The characteristics presented in this manual should be the same as those that appear online. In
line with our policy of constant improvement we may revise content over time to improve clarity and
accuracy. In the event that you see a difference between the manual and online information, use
the online information as your reference.
Related Documents
You can download these technical publications and other technical information from our website
"Otasuke Pro!" at http://www.pro-face.com/otasuke/.
Title of Documentation Reference Number
GP-Pro EX Reference Manual Maintenance/Troubleshooting Guide
GP-Pro EX Device/PLC Connection Manual