Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 83)

LT-4201TM/4301TM Hardware Manual
83
USB Data Transfer Cable - USB Driver Installation
Important Information
Follow these instructions to avoid damage to the cable connector or the unit:
 Do not connect the USB data transfer cable until told to do so in the instructions.
 Insert the connector at the correct angle when connecting the USB data transfer cable to the
PC or to the unit.
 Hold the connector, not the cable itself when disconnecting the cable.

Use the port designated during installation. If the cable is unplugged from the port designated
during installation and connected to a different port, the Operating System (OS) does not
recognize the new port.
 Restart the PC and quit all resident applications before reinstalling the software if the installation
does not complete successfully.
NOTE: For transfer methods, refer to the following manual: GP-Pro EX Reference Manual
"Transferring project files via USB transfer cable".
USB Host Interface Characteristics
USB (Type A) Interface USB (mini-B) Interface
Connector USB 2.0 (Type A) x 1 USB 2.0 (mini-B) x 1
Power Supply Voltage 5 Vdc ± 5% –
Maximum Current Supplied 500 mA –
Maximum Transmission Distance 5 m (16.4 ft)