Actron CP9190 - Manual (Page 109)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 – 5
GM Historic (OBD I) Diagnostics
5
Never operate the tool while driving. Have another
person assist with the operation of the Scan Tool.
✓
This function can be performed with KOEO or KOER.
2. Confirm selection.
•Press
LEFT or RIGHT to move the brackets to the desired
response.
• Press
ENTER.
✓
If a recording currently exists in
memory, a message to Erase Old
Recording is displayed. The Scan
Tool stores only one recording at
a time, so be sure to review it
before erasing it.
Multiple Group Vehicles
✓
Some vehicles display a Select Group screen for recording data.
In these cases, only one group of data can be recorded at a time.
Recording another group of data overwrites the present one.
3. Select Trigger Method.
•Use
UP or DOWN arrow
key until desired trigger
method is highlighted.
•Manual Trigger begins
recording when the
ENTER
key is pressed.
•Trigger on Codes begins
recording when a diagnostic
trouble code (DTC) is stored in
the PCM.
•Select a method and press
ENTER.
✓
If Manual Trigger is selected,
press
ENTER to begin
recording. Trigger on Codes will
not show this screen.
! WARNING ! WARNING
No
Previous recording
in memory. Do you
want to erase it and
make a new one?
Record Data
<Yes>
Manual Trigger
Trigger on Codes
Select Trig Method
Manual Trigger
Press BACK
to exit.
Ready to record
Press ENTER
to start recording.
Record Data