Actron CP9190 - Manual (Page 77)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 13
Global OBD II Diagnostics
4
✓
Read Codes can be done with the key on engine off (KOEO) or with
the key on engine running (KOER).
From Diagnostic Codes Menu:
1. Select Read Codes.
•Use
UP or DOWN arrow
key until Read Codes is
highlighted.
•Press
ENTER.
✓
If no DTCs are present a message stating System Pass: No Faults
Detected is displayed.
2. View and write down DTCs.
•Use
UP or DOWN arrow key.
❒
In the example shown module
(MOD) $18 is reporting the
DTCs.
Read Codes
Pending Codes
Erase Codes
View Freeze Data
Review Data
Print Data
Code Lookup
Diagnostic Codes Menu
Read Codes 

1 of 3
MOD $18
IAT Sensor 1
Circuit High Input 
P0113