Actron CP9190 - Manual (Page 45)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 11
Using The Scan Tool
3
1.Select Beeper.
• Use
UP or DOWN
arrow key until Beeper is
highlighted.
• Press
ENTER.
2.Select desired Beeper sound
choice.
• Use
UP or DOWN
arrow key until desired choice
is highlighted.
3.Save Beeper sound setting.
• Press
ENTER.
✓
Press
ENTER again to return to the System Setup menu.
Changing Auto-Power Off
The Auto-Power Off feature allows the tool to turn off automatically after
a selected amount of time when tool is not being used.
From System Setup menu:
1.Select Auto Power Off.
•Use
UP or DOWN arrow
key until Auto Power Off is
highlighted.
•Press
ENTER.
English/Metric ?
Contrast Adjust
Beeper 
Auto Power Off 
Tool Information
Display Test
Keyboard Test
System Setup
Beeper 
English/Me
Off
Beeper Sound
On (Default)
English/Metric
Contrast Adjust
Beeper
Auto Power Off
Tool Information
Display Test
Keyboard Test
System Setup
Auto Power Off