Actron CP9190 User Manual
Page 48
Advertising
Using The Scan Tool
3 – 14 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
2. Start Display Test.
•Press
ENTER.
3. Look for Missing Spots.
• All characters display in solid black if
there are no concerns.
• Screen flips back and forth between
screens shown below.
4. When Done, Press
BACK Key.
Check for missing
spots in the display
Press Back
to Quit
Display Test
Advertising
This manual is related to the following products: