Actron CP9190 - Manual (Page 56)

Using The Scan Tool
3 – 22 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
From Special Tests menu:
1. Select Print Data.
•Use
UP or DOWN arrow
key until Print Data is
highlighted.
•Press
ENTER.
✓
On the Print Menu, Print All prints all data collected by the Scan Tool.
✓
When printing playback data, Start Frame and End Frame need to be
defined.
2.Select Data To Be Printed.
•Use
UP or DOWN arrow
key.
•Press
ENTER.
✓
The Print Menu shows a check
mark next to the item(s) that has
data.
Diag Mon Tests
On Board Systems
Vehicle Info
Modules Present
Review Data
Print Data
Special Test Menu
Print Data 
Print All
I/M Readiness
Read Codes
Pending Codes
Freeze Data
O2 Monitor Test
Diag Mon Tests
Print Menu
Print All