Actron CP9190 - Manual (Page 97)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 33
Global OBD II Diagnostics
4
On-Board Systems
The On-Board Systems test allows the Scan Tool to control operation
of vehicle components, tests or systems.
✓
Some manufacturers do not allow tools to control vehicle systems. A
vehicle not supporting an on-board system is identified by a message
that is displayed when selected.
✓
Refer to the vehicle service manual for on-board systems instructions.
From the Special Tests Menu:
1. Select On-Board Systems.
•Use
UP or DOWN arrow
key until On-Board Systems
is highlighted.
•Press
ENTER.
✓
A list of on-board systems and
components available for testing are shown on the display.
2. Select Test.
•Use
UP or DOWN arrow
key.
•Press
ENTER.
3. Return to On-Board Systems menu.
•Press
BACK key.
4. Return to Special Tests Menu.
•Press
BACK key.
I/M Readiness ?
Drive Cycle Monitor
State OBD Check
O2 Monitor Test
Diag Mon Tests
On-Board Systems
Vehicle Info
Special Tests Menu
On-Board Systems
Evap Leak Test
On-Board Systems
Evap Leak Test