Actron CP9190 - Manual (Page 93)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 29
Global OBD II Diagnostics
4
2. Select O2 Sensor.
•Use
UP or DOWN arrow
key until desired O2 Sensor is
highlighted.
•Press
ENTER.
✓
The O2 sensors located
upstream (before catalyst) may perform differently than ones located
downstream (after catalyst).
✓
Test IDs are shown for unknown O2 sensor tests.
3. View Results of Selection.
•Use
UP or DOWN arrow
key.
4. Return to O2 Sensor Tests menu.
•Press
BACK.
5. Return to Special Tests Menu.
•Press
BACK.
O2 Bank1 Sensor1
O2 Bank1 Sensor2
O2 Bank2 Sensor1
O2 Bank2 Sensor2
Select O2 Sensor
O2 Bank1 Sensor1
RICH-LN Thresh
MAX: -----(V)
MEAS: 0.555(V)
MIN: -----(V)
MOD: $10
O2 Bank1 Sensor1