Actron CP9190 - Manual (Page 82)

Global OBD II Diagnostics
4 – 18 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
4. Observe Command Sent message
is displayed.
•Press
ENTER.
5. Return to Diagnostic Codes Menu.
•Press
ENTER .
View Freeze Data
When an emission-related fault occurs, certain vehicle conditions are
recorded by the on-board computer. This information is referred to as
freeze frame data. View Freeze Data is a snapshot of the operating
conditions at the time of an emission-related fault.
✓
View Freeze Data can be overwritten by faults with a higher priority.
✓
If codes were erased, View Freeze Data may not be stored in vehicle
memory depending on vehicle.
From the Diagnostic Codes Menu:
1. Select View Freeze Data.
•Use
UP or DOWN arrow
key until View Freeze Data is
highlighted.
•Press
ENTER.
Read Codes
Pending Codes
Erase Codes
View Freeze Data
Review Data
Print Data
Code Lookup
Diagnostic Codes Menu
View Freeze Data