Actron CP9190 User Manual
Page 124
Ford Historic (OBD I) Diagnostics
6 – 2 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
6
❒
Review Data
❒
Print Data
•KOEO Codes
•KOER Codes
•IVSC KOEO Codes
•IVSC KOER Codes
•Playback
✓
For Ford Historic diagnostics, the above functions have data to
review or print. For Review/Print Data instructions, refer to
appropriate page in Using The Scan Tool.
– Code Lookup
– Tool Setup Menu
– English/Metric
– Contrast Adjust
– Beeper
– Setup User Key
If the function is not supported by the vehicle, then the Scan
Tool does not display it.
✓
Most Ford vehicles prior to 1996 use the EEC-IV system. Vehicles
with Mazda-sourced engines use the Mazda Electronic Control
System (MECS). Refer to “
Appendix B - Data Link Connectors
".
✓
If the Scan Tool displays an Error Message, make sure the
adapter cable is securely attached and the ignition key is on. Cycle
the ignition key to off for 10 seconds, thenon. This may be required
because the Ford system allows only one Self-Test function to be
performed for each key on. Attempt the test selected again and if
the problem remains, refer to “Error Messages” on page 9-2.
IMPORTANT