Actron CP9190 - Manual (Page 47)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 13
Using The Scan Tool
3
2.View Information:
❒
Serial Number (Serial No:)
❒
Software ID (SW ID:)
❒
Hardware Version
(HW Ver:)
❒
Boot Version (Boot Ver:)
❒
Product ID (Prod ID:)
❒
Board ID (Board ID:)
❒
Burn Date (Burn Date:)
❒
Burn Location (Burn Loc:)
3.Write Down Scan Tool Information.
• Space is provided on inside front cover to record the Scan Tool
information.
4.Return to Setup Tool Menu.
•Use the
BACK key.
OR
•Use the
ENTER Key.
Display Test
The Display Test is used to check the display.
✓
The test fills every pixel of the display with a solid black character.
From System Setup menu:
1.Select Display Test.
•Use
UP or DOWN arrow
key until Display Test is
highlighted.
Serial No: 10002076
SW ID: 0A46H
HW Ver: 1
Boot Ver: 1
Prod ID: 5
Board ID: 11
Burn Date: 04/25/04
Tool Information
English/Metric
Contrast Adjust
Beeper
Auto Power Off 
Tool Information
Display Test
Keyboard Test
System Setup
Display Test