Actron CP9190 - Manual (Page 37)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 3
Using The Scan Tool
3
Included with Scan Tool
Table 1: Included with Scan Tool
Part Part Description
CD The CD contains the Manual in English, French
and Spanish. The CD also includes a DTC lookup
program for looking up DTCs, and language appli-
cations for reprogramming the Scan Tool in Span-
ish and French.
USB Cable Used to print and upgrade software depending on
tool.
OBD II Cable Communicate between the vehicle and tool. Also
supplies power to the tool.
Carry Case Place to store the Scan Tool when tool is not in use.
Warranty & Registra-
tion Card Provides you with the ability to keep up to date
with the newest updates and technology available.
GM Historic Cable Used to communicate with all GM vehicles using a
12-pin DLC.
Ford EEC-IV/MCU
Cable Used to communicate with all Ford vehicles that
use the large 6-sided connector.
Chrysler SCI Cable Used to communicate with all Chrysler vehicles
using the L-shaped 6-pin connector located in the
engine compartment.
Extension Cable Used to attach the GM Historic cable, Ford EEC-
IV/MCU cable or Chrysler SCI cable to the Scan
Tool.
Cigarette Lighter Cable Provides power to the Scan Tool for vehicles that
require the Ford EEC-IV/MCU cable, GM Historic
cable or Chrysler SCI cable.