Actron CP9190 - Manual (Page 94)

Global OBD II Diagnostics
4 – 30 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
Diagnostic Monitor Tests
The Diagnostic Monitor Test function is useful after servicing or after
erasing a vehicle’s memory. Test results do not necessarily indicate a
faulty component or system.
✓
Non-CAN vehicles Diagnostic Monitor Test receives test results for
emission-related powertrain components and systems that are not
continuously monitored.
✓
CAN vehicles Diagnostic Monitor Test receives test results for
emission-related powertrain components and systems that are and
are not continuously monitored.
✓
Vehicle manufacturer is responsible for assigning test and component
IDs.
From the Special Tests Menu:
1. Select Diag Mon Tests.
•Use
UP or DOWN arrow
key until Diag Mon Tests is
highlighted.
•Press
ENTER.
✓
Applicable Diagnostic Monitor Tests are displayed.
I/M Readiness ?
Drive Cycle Monitor
State OBD Check
O2 Monitor Test
Diag Mon Tests
On-Board Systems
Vehicle Info
Special Tests Menu
Diag Mon Tests