Actron CP9190 - Manual (Page 57)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 23
Using The Scan Tool
3
✓
When selected data does not exist in the Scan Tool’s memory, a
message informs the user to run the function.
3.Return to Select Print Data screen.
•Press
ENTER
.
Code Lookup
Code Lookup is used to look up definitions of DTCs stored in the Scan
Tool.
✓
The Scan Tool does not require power from the vehicle to perform this
function.
1. Select Code Lookup.
•Use
UP or DOWN arrow
key until Code Lookup is
highlighted.
•Press
ENTER
.
Datastream ?
Diagnostic Codes
Special Tests
Review Data
Print Data
Code Lookup
Tool Setup
Global Function List
Code Lookup