Actron CP9190 - Manual (Page 73)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 9
Global OBD II Diagnostics
4
2. Select Display Lines.
•Use
UP or DOWN arrow
key.
•Press
ENTER.
Changing Measurement Units
✓
Refer to “Changing Measurement Units” on page 3-8 of Using The
Scan Tool.
Record Data
✓
The Record Data function records PIDs while vehicle is parked or
being driven.
✓
The Record Data function is mainly used for diagnosing intermittent
driveability problems that cannot be isolated by any other method.
✓
The recording time varies. A recording consists of frames of data prior
to the trigger and several frames after the trigger.
✓
Some vehicles wait a long period of time to store a trouble code after
a driveability problem occurs. If the operator selected Trigger On
Codes when making a recording, the operator might not see any
drastic change in the data parameters before and after trigger point.
Two people must be in vehicle when driving. One to
drive and the other to operate the Scan Tool.
1 Line
2 Lines
3 Lines
4 Lines
5 Lines
6 Lines
7 Lines
Select Display Lines
1 Line
! CAUTION