Actron CP9190 - Manual (Page 75)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 11
Global OBD II Diagnostics
4
3. From the Pick Trigger
Method Screen.
•Use
UP or DOWN arrow
key until desired trigger
method is highlighted.
•Press
ENTER.
✓
When trigger event (either a DTC or a Press of the
ENTER key)
occurs, time is recorded and data is saved.
✓
Data continues to be saved until
either:
❒
Record memory is full.
❒
Operator presses
ENTER .
✓
Scan Tool recording times vary. A recording consists of frames of data
prior to trigger and several frames after trigger.
Manual Trigger
Trigger on Codes
Pick Trigger Method
Manual Trigger
Ready to record.
Press Enter
to start recording.
Press BACK
to exit.
Record Data
Waiting for trouble
code to trigger
start of recording.
Press BACK
to exit.
Record Data
**Recording Data**
Frame xx of yy.
Press ENTER
to stop.
Record Data