HT instruments MACROTEST G3 - Manual (Page 80)

MACROTESTG3 - COMBIG3
EN - 79
7.2.1. Anomalous situations
1. In case there is no measure saved and the instrument
memory is accessed, a screen similar to the one
reported here to the side is displayed.
2. In case tries to define a new sub-node over the 3rd
level the instrument provides the warning screen shown
to the side and blocks the operation
3. In case tries to create a sub-node by using a just used
name, the instrument provides the warning screen
shown to the side and is necessary to define a new
name
4. In case tries to define a numebr of nodes of 1st, 2nd
and 3rd level higher than 250 (for each level), the
instrument provides the warning screen shown to the
side
5. In case tries to include a comment of length higher than
30 chars, the instrument provides the warning screen
shown to the side