Jenway 6715 - Manual (Page 125)

107
To enter the required parameters for the sample(s) under test, select the Settings key and the
instrument will display the following screen:
Mode settings – method name, wavelength, measurement mode, resolution, units, method
security (if logged in)
Calibration – allows setting of cal standards (up to 20)
Measurement display – allows setting of curve fit, auto scaling, axis setting and colour
selection
Accessory options – varies with type of accessory module fitted
Allows selection of internal or external printer, graph details, batch ID and the Auto Save
options
Press to accept settings entered
Setting Method iD
To allocate a Method name select the Method key and enter the preferred name using the
alphanumeric keypad. The Clear key will clear all information entered from the screen. The Del key
allows individual letters or digits to be removed. The Cancel key will return you to the previous menu
and the method name will remain as Default Method. The Enter key accepts the new method ID and
returns you to the previous menu.
Note: The new Method ID can only be used to identify the method on a printout to the internal or
external printer module. The generic user has no additional facility to store or recall these results or the
method settings.