Jenway 6715 - Manual (Page 89)

71
To enter the required parameters for the sample(s) under test, select the Settings key and the
instrument will display the following screen:
Mode settings – method name, measurement mode, sample style, method security
(if logged in)
Setting wavelengths – allows 2 to 4 wavelengths to be set
Calculations - allows the selection of calculations and constants
Accessory options – varies with type of accessory module fitted
Allows selection of internal or external printer, batch ID and the Auto Log options
Press to accept settings entered
Setting Method iD
To allocate a Method name select the Method key and enter the preferred name using the
alphanumeric keypad. The Clear key will clear all information entered from the screen. The Del key
allows individual letters or digits to be removed. The Cancel key will return you to the previous menu
and the method name will remain as Default Method. The Enter key accepts the new method ID and
returns you to the previous menu.
note: The new Method ID can only be used to identify the sample or batch on a printout to the
internal or external printer module as a single reading or a set of multiples if the Auto Log facility is
used. The generic user has no additional facility to store or recall these results or the method settings.